Skip to main content

Titan 4G · DIN rail · Class 0.5S

Titan 4G — 4G Energy Meter with MQTT

Titan 4G is a 3-phase IoT energy meter, Class 0.5S (IEC 62053-22), with a built-in 4G module that publishes readings over MQTT to Tech OVN's Energy Intelligence Platform or any MQTT broker. It keeps Titan's RS485 port, grid and DG energy registers and DG run hours, and costs ₹11,500 + GST.

₹11,500 + GSTper meter · CTs extra, from ₹950 + GST · data SIM plan separate
  • 4G built in
  • MQTT only
  • RS485 kept
  • 2-year warranty

Buying 10 or more? Project pricing within 24 hours.

Tech OVN Titan DIN-rail energy meter — the Titan 4G shares this housing
Request Quote

Trusted by energy & industrial leaders

Tata Power logo
BSES logo
HAL (Hindustan Aeronautics) logo
Hero MotoCorp logo
Torrent Power logo
Indian Railways logo

Customers include Tata Power, BSES, HAL (Hindustan Aeronautics), Hero MotoCorp, Torrent Power and Indian Railways.

At a glance

What it is
A Titan 3-phase Class 0.5S energy meter with a built-in 4G module. Data goes out over MQTT.
Best for
DG sites, pump houses, telecom and remote assets, leased premises and temporary sites — anywhere a site network is missing or off-limits.
Price
₹11,500 + GST per meter. CTs extra. Data SIM and platform subscription are separate recurring items.
Not on this SKU
WiFi, Ethernet, Modbus TCP and BACnet/IP. Need those? Choose Titan (₹11,000 + GST).

Why a 4G Version of Titan

On most remote sites, the meter is the cheap part. Getting its data out — a network, a gateway, a data logger, someone to maintain them — is what costs time. Titan 4G removes that step.

No Site Network Needed

Remote DG yards, pump houses, telecom shelters, construction sites and rented premises rarely have WiFi or an Ethernet drop you are allowed to use. Titan 4G carries its own cellular link, so it reports from the day it is powered — without asking the client's IT team for anything.

MQTT Straight From the Meter

The meter publishes its readings to an MQTT broker over 4G — Tech OVN's Energy Intelligence Platform or your own broker. No data logger, no serial-to-cellular gateway, no second box to power and maintain.

Same Titan Metering

Everything that makes Titan a Titan stays: Class 0.5S active energy (IEC 62053-22), per-phase V, I, kW, kVA, kvar, PF, frequency, harmonics to the 31st, kWh / kvarh / kVAh, and separate grid and DG energy registers.

RS485 Stays On Board

The RS485 port is kept. Use it as a Modbus RTU / BACnet MS/TP slave to a local BMS or PLC, or — on generator sites — as a Modbus master that reads the genset controller, so engine data rides out over the same 4G link.

Where Titan 4G Fits

The same meter, chosen for one reason: the site has no network you can use.

Diesel Generator Sites

DG energy in its own registers, DG run hours, load and power factor — plus engine data from the genset controller over RS485 — reported from sites that have no network of their own.

Pump Houses & Tubewells

Energy and run time on pumping stations and borewells spread across villages and farms. For a dedicated pump monitoring unit with dry-run and fault detection, see Titan Pump RMS.

Telecom & Remote Assets

Shelters, cold rooms, street-lighting feeders, water-treatment skids — any metered asset where pulling a cable or joining a WiFi network is the expensive part of the job.

Leased & Multi-Site Portfolios

Retail chains, franchise outlets and leased premises where the landlord's or tenant's network is off-limits. One meter, one SIM, data in the same dashboard for every site.

Group Metering, Over 4G

Titan Group mode — four single-phase circuits on one meter, with grid / DG split per circuit — also runs on Titan 4G, so four shops or four floors report over one cellular link.

Temporary & Project Sites

Construction power, events, rental equipment and commissioning tests — install, power up, and the readings are online without a network survey.

4G Generator Monitoring in One Box

DG sets are usually where the network isn't. Titan 4G meters the generator's output in its own DG register set — switched by a 12 V DG-on signal — and records DG run hours, load, power factor, voltage and frequency. Its RS485 port can act as a Modbus master and read the genset controller, so oil pressure, coolant temperature, battery voltage, alarms and the fuel level from the controller's fuel sensor travel out over the same 4G link.

Put energy and fuel side by side and you get kWh per litre — the practical efficiency figure for a generator — and a record of fuel that left the tank without a matching kWh.

See the full generator monitoring system, or estimate your generator's efficiency with the DG fuel consumption calculator.

Technical Specifications

Titan's metering, with a built-in 4G module.

Metering

ParameterSpecification
AccuracyClass 0.5S active energy (IEC 62053-22), Class 1 reactive
Voltage48–500 V AC
Phases3 phase, 3 × single phase, or Titan Group mode (4 single-phase circuits)
Current InputExternal CTs, 5 A secondary, 100 A–2,000 A primary — ring or split-core (CTs extra, from ₹950 + GST)
MeasuredPer-phase V, I, kW, kVA, kvar, PF, frequency; kWh, kvarh, kVAh; harmonics / THD to the 31st
Grid / DGSeparate DG register set switched by a 12 V DG-on signal, plus DG run hours

Connectivity

ParameterSpecification
CellularBuilt-in 4G module
Data out over 4GMQTT only — publishes to the Energy Intelligence Platform or any MQTT broker
Not available on this SKUWiFi, Ethernet, Modbus TCP, BACnet/IP (choose Titan for those)
RS485Modbus RTU or BACnet MS/TP slave — or Modbus master to read a genset controller (one role at a time)
SIMNeeds an active data SIM; the data plan is a separate recurring item
FirmwareOver-the-air (OTA) updates

Titan 4G vs Titan vs Titan RS485

One metering engine, three ways to get the data out. Pick by the network the site has.

Titan 4GTitanTitan RS485
Price (+ GST)₹11,500₹11,000₹6,500
MeteringClass 0.5SClass 0.5SClass 0.5S
Link to the cloud4G (own SIM)WiFi or EthernetNone — via your BMS / PLC
MQTTYes (only protocol over 4G)YesNo
Modbus TCP / BACnet/IPNoYesNo
RS485 (Modbus RTU / BACnet MS/TP)YesYesYes
Grid / DG registers + DG run hoursYesYesYes
Group mode (4 single-phase circuits)YesYesYes
Best forSites with no usable networkPlants & buildings with a networkPanels wired to a BMS / SCADA

Part of the Titan Family

The same Class 0.5S metering across the range.

ProductDescriptionStatus
TITANYou are hereCore smart energy meter. WiFi + Ethernet + RS485Available
TITAN AUDITRapid deployment logger. Split-core CT, plug & playAvailable
TITAN EVEV charge controller. OCPP 1.6J + 2.0.1, designed to IEC 61851Available
TITAN PQPower quality meter. Harmonics, sags, swells, flicker, transientsComing Soon
TITAN ASSETCondition monitoring. Energy + vibration + temperatureAvailable
TITAN PLUS BTUChiller efficiency meter. kW/TR + BTU on a single deviceAvailable
TITAN BTUBTU meter. Chilled water, hot water, district coolingAvailable
TITAN COMPLIANCEFire pump monitoring. NFPA 25 / IS 15301 test loggingAvailable
TITAN PUMPPump controller. Dry-run protection + energy monitoring + remote startAvailable
TITAN PUMP RMSRemote pump monitoring. 4G, run hours + dry run + fault alertsAvailable
TITAN BLOWERBlower controller. Filter-clog + over-pressure protection + energy monitoringAvailable

Frequently Asked Questions

4G, MQTT, generator sites, group metering and pricing.

A 4G energy meter has a cellular modem built in, so it sends its readings over the mobile network instead of the site's WiFi or Ethernet. Titan 4G is a 3-phase Class 0.5S energy meter with a 4G module that publishes its data over MQTT — it needs a data SIM, but no gateway, data logger or site network.
MQTT only. Titan 4G publishes to Tech OVN's Energy Intelligence Platform or to any MQTT broker you run. It does not offer Modbus TCP, BACnet/IP or WiFi — if you need those, the standard Titan (WiFi + Ethernet + RS485, ₹11,000 + GST) is the right meter. The RS485 port is still available for Modbus RTU or BACnet MS/TP locally.
₹11,500 + GST per meter, ₹500 more than the WiFi + Ethernet Titan. CTs are extra (from ₹950 + GST each). The data SIM plan and, if you use it, the Energy Intelligence Platform subscription are separate recurring items. Buying 50 or more? Ask for project pricing.
Yes. Its RS485 port can act as a Modbus master and poll the genset controller, so engine readings the controller exposes — such as oil pressure, coolant temperature, battery voltage, speed, alarms and the fuel level from the controller's own fuel sensor — travel to the cloud over the same 4G link as the electrical data. While RS485 is the master, it cannot also be a slave to a BMS. Tell us your controller model and we confirm compatibility before you order.
Yes. Titan Group mode — four single-phase circuits on one meter, each with its own energy registers and its own grid / DG split — runs on Titan 4G as well as on the WiFi and RS485-only models. It is a monitoring and cost-allocation meter, not a prepaid meter: it has a single relay, so it cannot disconnect circuits individually.
Yes — 4G is an option on the Titan Audit portable logger too, which helps auditors who cannot join a client's WiFi. Ask for the 4G option when you request a Titan Audit quote.
Energy is accumulated in the meter's own registers, so kWh totals are not lost when the link is down — the next reading after the connection returns carries the up-to-date totals. Place the antenna where the site gets a usable signal; if a site has none, a wired Titan into a local system is the better choice.

Related

Titan — WiFi + Ethernet + RS485

The standard Titan, ₹11,000 + GST, with Modbus TCP, BACnet and MQTT.

Learn More →

Titan Group

Four single-phase circuits on one meter, grid / DG split per circuit.

Learn More →

Generator monitoring system

DG performance, condition, fuel and cost — Titan plus the genset controller.

Learn More →

Remote pump monitoring

Titan Pump RMS — 4G monitoring built for tubewells and pumping stations.

Learn More →

Get a Titan 4G quote

₹11,500 + GST per meter. Tell us the number of sites, CT ratings and whether you need generator data.