Titan Group · 4 circuits · Class 0.5S
Titan Group — Four Single-Phase Circuits in One Meter
Titan Group is a group energy meter: one Class 0.5S Titan meter that measures four single-phase circuits, keeps grid and DG energy separately for each circuit, and reports over RS485, WiFi + Ethernet or 4G. It is for monitoring and cost allocation, not prepaid billing, and starts at ₹6,500 + GST per meter — about ₹1,625 per circuit.
- 4 circuits per meter
- Grid / DG per circuit
- Class 0.5S
- Not prepaid
Buying 10 or more? Project pricing within 24 hours.

Trusted by energy & industrial leaders






Customers include Tata Power, BSES, HAL (Hindustan Aeronautics), Hero MotoCorp, Torrent Power and Indian Railways.
At a glance
- What it is
- A Titan firmware mode that meters four single-phase circuits in one Class 0.5S meter, with grid and DG energy per circuit.
- Best for
- Shops, floors, suites, PG rooms and single-phase machines where each needs its own grid and DG total.
- Models
- RS485 ₹6,500 · WiFi + Ethernet ₹11,000 · 4G ₹11,500 — all + GST per meter, CTs extra.
- What it is not
- Not a prepaid meter. It has one relay, so it cannot disconnect circuits one at a time.
How Titan Group Works
The Titan metering engine, configured to treat its inputs as four single-phase circuits instead of one three-phase feeder.
Four Circuits, One Meter
Each of the four single-phase circuits gets its own energy registers, its own name in the dashboard and its own share of the bill. One meter to mount, wire and commission instead of four.
Grid / DG Split Per Circuit
When the 12 V DG-on signal is present, each circuit's energy goes into its own DG registers. You see who used how much grid power and how much generator power — the split that decides most cost-allocation disputes.
Class 0.5S on Every Circuit
The same metering engine as Titan, designed to IEC 62053-22 Class 0.5S — not an indicative sub-meter. Per-circuit kWh, kVAh, kvarh, power factor and demand.
Pick How the Data Leaves
Group mode runs on the RS485-only model (into your BMS or PLC), the WiFi + Ethernet model (Modbus TCP, BACnet, MQTT, cloud) and Titan 4G (MQTT over cellular).
Three Models, Same Four Circuits
Choose by where the data has to go. Price per circuit is the meter price divided by four, before CTs.
| Model | Price per meter (+ GST) | Per circuit | Data out |
|---|---|---|---|
| Titan Group RS485 | ₹6,500 | ₹1,625 | RS485 (Modbus RTU / BACnet MS/TP) |
| Titan Group | ₹11,000 | ₹2,750 | WiFi + Ethernet + RS485, MQTT |
| Titan Group 4G | ₹11,500 | ₹2,875 | 4G (MQTT only) + RS485 |
The 4G model is Titan 4G in group mode; the WiFi model is Titan; the RS485 model is the RS485-only Titan.
Where Group Metering Pays Off
Anywhere several single-phase users share one supply — and one generator.
Shops in a Mall or Market
Four shops per meter, each with grid and DG energy, for monthly cost recovery by the owner or maintenance agency.
Floors & Departments
Allocate energy to floors, wings or cost centres in an office or plant without a meter per feeder.
Co-working & Business Centres
Meter cabins and suites for recharge of electricity and DG backup in the monthly invoice.
PGs, Hostels & Staff Quarters
Room or block-level consumption for fair cost sharing. Monitoring only — the meter does not cut supply per room.
Machines & Single-Phase Loads
Track four single-phase machines, lighting circuits or HVAC units for energy per product or per process.
Generator-Backed Sites
Where DG backup is billed at a different rate from grid power, the per-circuit DG split is the whole point.
Specifications
Group-mode specifics. Full metering specifications are on the Titan page.
Titan Group
| Parameter | Specification |
|---|---|
| Circuits | 4 single-phase circuits per meter (Titan Group mode) |
| Accuracy | Class 0.5S active energy per circuit (designed to IEC 62053-22) |
| Per-circuit data | kWh, kVAh, kvarh, V, I, kW, PF, demand — grid and DG registers kept separately |
| Grid / DG | Per-circuit DG registers switched by a 12 V DG-on signal; DG run hours |
| Relay | One relay per meter — not per circuit, so the meter is not a prepaid meter |
| Models | RS485-only, WiFi + Ethernet + RS485, or 4G (MQTT only) + RS485 |
| CTs | External CTs, 5 A secondary — sized per circuit (from ₹950 + GST each) |
| Mounting | DIN rail |
One Titan Group vs Four Single-Phase Meters
The usual alternative is a row of separate meters — and, for a DG split, often a second row.
| Titan Group | Four separate single-phase meters | |
|---|---|---|
| Meters to mount and wire | 1 | 4 |
| Accuracy | Class 0.5S | Usually Class 1.0 |
| Grid / DG split per circuit | Yes | Rarely — often a second meter per circuit |
| Data out | RS485, WiFi / Ethernet / MQTT, or 4G | Often none, or RS485 + a separate data logger |
| Per-circuit disconnect (prepaid) | No — one relay | Only on prepaid meters |
Frequently Asked Questions
Group metering, prepaid, DG split, pricing and integration.
Related
Sub-metering for business
How Tech OVN meters floors, lines and tenants behind the utility meter.
Learn More →Titan 4G
Titan with a 4G module, MQTT only — group mode included.
Learn More →Dual-source energy meter
How grid and DG energy are kept in separate registers.
Learn More →Generator monitoring system
DG performance, condition, fuel and cost.
Learn More →Get a Titan Group quote
Tell us how many circuits, the load on each, and whether you have DG backup.
