Skip to main content

EV Charging Software

In development · early access

EV Charging Management System (CSMS)

Tech OVN's charging station management system (CSMS) runs OCPP 1.6J and 2.0.1 chargers: remote control, driver authorisation, tariffs, billing and per-charger energy analytics, with a white-label option. It is in early access for selected partners; Tech OVN chargers are available now, ship from stock and work with any OCPP backend in the meantime.

Energy analytics screen of the Tech OVN Energy Intelligence Platform with total energy, peak demand, load factor, average daily energy and energy cost tiles, a daily consumption trend against the previous period, an hour-of-day demand heatmap and a weekday versus weekend demand chart

What the CSMS Does

What the platform is being built to do. Modules are rolling out through early access — see what's available today below.

Remote Monitoring & Control

See every charger's live status, start and stop sessions remotely, and get alerts the moment a charge point faults — across one site or a whole network.

Driver Authorisation

RFID and app-based authorisation so only approved drivers, tenants, or fleet vehicles can charge. Per-user access control, no open sockets.

Session Metering Data

Per-session kWh from each charger's built-in meter, reported over OCPP — the basis for tariffs, invoices and cost allocation.

Billing, Tariffs & Payments

Time-of-use and per-kWh tariffs, session invoices, and cost allocation to tenants, employees, or fleet vehicles — with revenue-grade metering behind it.

Firmware & Fleet Management

Push OCPP firmware updates and configuration to chargers over the air, and manage your entire estate of charge points from a single dashboard.

Analytics & Reporting

Utilisation, energy cost per charger, uptime, and CO₂ reporting — the data you need to prove ROI and keep a charging network healthy.

Use Ours — or Bring Your Own

Every Tech OVN charger is OCPP 1.6J and 2.0.1 capable, which means the hardware is never locked to one platform. You choose how to run it:

Run on the Tech OVN CSMS

One platform for monitoring, authorisation, billing, and reporting — with a white-label option planned so CPOs and property operators can launch a branded charging service without building software. Available through early access.

Bring your own backend

Already run a CPO platform? Connect Tech OVN chargers to it over standard OCPP — no lock-in. The chargers work the same either way, and you can move them onto the Tech OVN CSMS later with no hardware change.

Available Today vs On the Roadmap

We'd rather be straight about what's shipping now and what's coming. Deploy chargers today with confidence — the management layer is arriving through early access.

Available now

  • OCPP 1.6J & 2.0.1 chargers — connect to any backend
  • Per-charger energy analytics on the Energy Intelligence Platform
  • Utilisation dashboards and energy cost per charger
  • Revenue-grade metering for defensible billing

Rolling out (early access)

  • Remote session start / stop and fault alerts
  • RFID & app driver authorisation
  • Billing, tariffs, payments and white-label branding

Frequently Asked Questions

Common questions about the Tech OVN CSMS, OCPP, and bringing your own backend.

A CSMS — charging station management system — is the software that connects to your EV chargers over OCPP and lets you monitor them, authorise drivers, set tariffs, bill sessions, and push firmware. It's the control layer that turns a set of chargers into a managed network. The Tech OVN CSMS is one such platform, being built for OCPP 1.6J and 2.0.1 chargers with a white-label option, and currently in early access. 'CPMS' (charge point management system) means the same thing.
OCPP (Open Charge Point Protocol) is the language between a charger and its CSMS — it's how the platform monitors and controls the hardware. OCPI (Open Charge Point Interface) connects one network to another for roaming, so a driver signed up with one operator can charge on another's network. Tech OVN chargers speak OCPP 1.6J and 2.0.1. OCPI roaming is on the CSMS roadmap but is not part of early access and has no release date yet.
The CSMS is in active development, with early-access onboarding for selected partners and sites. The charger hardware and the analytics layer of the Energy Intelligence Platform are available now; the management, authorisation and billing modules are rolling out through early access. Talk to us about joining the programme.
Yes. Every Tech OVN charger supports OCPP 1.6J and OCPP 2.0.1, so you can connect it to any CPO platform or backend you already use, or move it onto the Tech OVN CSMS as it becomes available. We help with OCPP integration, and for bulk orders we can adapt the firmware to make integration easier.
White-label branding is part of the plan — the platform is being designed to run under your own brand, so CPOs, resellers and property operators can offer a branded charging service without building software. It is rolling out through early access, not generally available yet.
It is being built for OCPP 1.6J and OCPP 2.0.1 — the same open protocols our chargers ship with — so it can work with a wide range of charge-point hardware, not only Tech OVN's. OCPP 2.1 (published January 2025) is not supported.
Because it speaks standard OCPP, the CSMS is being built to manage any OCPP-compliant charger, not just Tech OVN hardware — useful for mixed estates and for operators migrating existing sites onto one platform.
You can deploy Tech OVN OCPP chargers today and connect them to your existing backend, and use the Energy Intelligence Platform for per-charger energy analytics, utilisation, and cost allocation. As CSMS modules ship, your existing chargers move onto them with no hardware change.

Want early access to the CSMS?

Tell us about your chargers and sites — we'll get you onto the early-access programme, whether you run our platform or your own.