Solar PV Monitoring System — Grid vs Solar, In Real Time

Behind-the-meter monitoring for commercial and industrial rooftop solar owners. Measures generation, site consumption, and grid contribution with Class 0.5S meters — so self-consumption %, performance ratio, savings, and ESG carbon are all measured, not estimated.

Generation + Load + GridMeasurementClass 0.5S (IEC 62053-22)AccuracyAny Brand (Modbus/SunSpec)InverterMulti-Site, Multi-CountryDeployment
Tech OVN solar PV monitoring system — behind-the-meter grid vs solar tracker

Know Exactly How Your Solar Plant Is Performing

Most rooftop solar owners discover months later that their plant is underperforming — by reading inverter dashboards, comparing with EPC commissioning numbers, and guessing at the gap. The Tech OVN solar monitoring system replaces guesswork with continuous, hardware-grade measurement of three things at once: how much your solar plant is generating, how much your facility is consuming, and how much is flowing to or from the grid.

That trio is what tells you the actual self-consumption %, the actual avoided cost, the actual performance ratio, and the actual carbon offset for ESG reporting — instead of inverter estimates that miss derating, soiling, shading, and downtime losses. We don't supply DISCOM net meters; we supply the owner-facing monitoring system that sits behind the utility meter and works for you, not the utility.

What the System Tracks

Six capabilities that turn solar generation data into solar investment intelligence.

Grid vs Solar Split — In Real Time

Continuous measurement of how much load is met by your rooftop solar versus how much is drawn from the grid. Self-consumption % calculated live, not estimated monthly.

Generation, Consumption & Export Tracking

Three independent measurements — solar generation (kWh produced), site consumption (kWh used), and grid export (kWh fed back). The trio that tells you whether your solar plant is actually paying off.

Plant-Level Performance Visibility

Daily, monthly, and lifetime kWh per kWp installed. Performance ratio (PR) tracking. Underperformance alerts when generation drops below expected curves.

Multi-Site Portfolio Dashboard

One dashboard across 1 site or 200. Benchmark plants against each other. Spot the underperformer in a portfolio without site-by-site reviews.

Inverter & String-Level Integration

Pulls inverter data via Modbus / SunSpec where available, combined with hardware-measured generation. Works with any inverter brand — no vendor lock-in.

Savings & ROI Reporting

Tariff-aware savings calculation. CFO-ready reports showing kWh self-consumed × tariff = avoided cost. Carbon savings (tCO2) for ESG reporting.

Who Deploys Tech OVN Solar Monitoring

Owner-side and consultant-side users — never the utility billing process.

Commercial Building Owners

Office buildings, malls, and commercial complexes with rooftop solar — track tenant-allocated solar share, common-area generation, and ROI per kWp installed.

Industrial & Manufacturing Plants

Factories with rooftop or open-access solar — measure load coverage during production hours, identify when grid draw spikes, and benchmark plant-level PR.

Hotels, Hospitals & Hospitality

Round-the-clock operations where solar covers a portion of load — quantify the share, monitor plant health, and report ESG / sustainability metrics to corporate.

Real Estate / REIT Portfolios

Portfolio operators with solar across multiple buildings — single dashboard for performance, tenant allocations, and ESG reporting across the asset base.

Solar EPC Contractors (Post-Handover)

EPCs offering monitoring as a value-add to clients post-commissioning — without taking on monitoring software development themselves.

Energy & ESG Consultants

Consultants verifying solar plant performance, calculating actual self-consumption ratios, and producing M&V reports for clients on net-zero programmes.

System Specifications

ParameterSpecification
Measurement PointsGeneration meter (PV side), site consumption meter (load side), grid meter (utility side)
Meter AccuracyIEC 62053-22 Class 0.5S
Phases SupportedSingle-phase and three-phase 4-wire (CT-operated for any plant size)
Inverter IntegrationModbus RTU / TCP, SunSpec — any major brand
CommunicationRS485 (Modbus), Ethernet, WiFi, 4G cellular
Data CadenceReal-time (1-second) to 15-minute aggregates
Cloud PlatformTech OVN Energy Intelligence Platform — multi-site, multi-user, mobile
ReportingSelf-consumption %, PR, kWh/kWp, savings, ESG / Scope-2 carbon, performance vs forecast
AlertsUnderperformance, inverter fault, communication loss, abnormal consumption
Open APIsREST + MQTT — push to BMS, ERP, ESG reporting platforms
Geographic ReachManufactured in India; deployed across India, Middle East, Southeast Asia, Europe, Africa

Why Tech OVN

What separates a measurement-grounded solar monitoring system from an inverter dashboard wrapped in software.

We Measure It — We Don't Estimate It

Most cheap solar monitoring systems pull only inverter data and estimate self-consumption. We measure all three — generation, consumption, grid — with hardware-grade meters, so the self-consumption % is a measurement, not an inference.

Inverter-Brand Independent

Built to work with any inverter — Sungrow, Huawei, SMA, Solis, Polycab, Waaree, ABB, Delta, others. The meters do the measurement; inverters add string-level health visibility.

Class 0.5S — Same Hardware as Revenue Metering

Self-consumption claims that drive ROI reporting and ESG disclosures should be backed by Class 0.5S measurement, not Class 1.0 inverter sensors. Audit-grade by default.

Built for Portfolios

Single-site dashboards exist everywhere. Tech OVN was designed for portfolios — REIT operators, multi-plant industries, multi-building corporates — across multiple countries on one cloud.

Pair With Energy Monitoring + EV Charging

Solar monitoring is one piece of the behind-the-meter picture. Customers running rooftop solar typically also need full-facility energy monitoring, and increasingly EV charging integrated with solar self-consumption. Same platform, same meters, same dashboard.

Frequently Asked Questions

Common questions about behind-the-meter monitoring, inverter compatibility, ESG reporting, and international supply.

A behind-the-meter (BTM) solar monitoring system measures how a rooftop or captive solar plant interacts with the building or facility load — independent of the utility billing meter. It tells you, in real time, how much of your load is being met by solar versus how much is coming from the grid (and how much, if any, is being exported). It's the measurement layer that owners need to know whether their solar investment is performing.
A solar net meter is a utility billing meter installed by the DISCOM at the grid interconnection point — it's the meter the utility uses to calculate net energy import / export for billing. A behind-the-meter monitoring system is for the plant owner — it tracks generation, consumption, performance ratio, savings, and ESG metrics independently of the utility's billing process. We focus on the owner-facing monitoring side; we do not supply DISCOM net meters.
Self-consumption % is the share of solar generation consumed on-site (rather than exported to the grid). For commercial / industrial owners with daytime loads, high self-consumption usually means better ROI — because self-consumed solar offsets grid energy at the full retail tariff, while exported solar typically receives a lower feed-in / wheeling tariff. Tracking self-consumption is one of the highest-value metrics for solar plant ROI.
Yes. The hardware-grade meters do the primary generation, consumption, and grid measurement — independent of the inverter. Inverter integration (Modbus / SunSpec) adds string-level health and fault visibility, and we support all major inverter brands (Sungrow, Huawei, SMA, Solis, Polycab, Waaree, ABB, Delta, etc).
Yes. The platform was designed for portfolios — REIT operators, multi-plant industries, and multi-building corporates with solar across many sites. Single dashboard, role-based access, site benchmarking, and consolidated ESG reporting are built in.
Carbon savings (tCO2 avoided) calculated using grid emission factors, monthly and annual self-consumption summaries, and audit-grade M&V data exportable for GRI / SBTi / BRSR reporting. Methodology aligned with IPMVP and the GHG Protocol.
Yes. We ship from Delhi NCR to the Middle East, Southeast Asia, Europe, and Africa. Multi-language dashboards, multi-currency tariff support, and country-specific grid emission factors are configurable.
Yes — we work with EPCs as a channel partner for post-commissioning monitoring. EPCs can include the monitoring system in the BoQ, white-label the dashboard, or refer clients to Tech OVN directly. Talk to our team about EPC partner pricing.

Measured solar performance — not inverter estimates

Talk to our team about pilots, EPC partnerships, multi-site deployments, and international supply.